Leister HOTWIND SYSTEM Bedienungsanleitung Seite 22

Handle Kit
• The assembly of the handle kit may only be used by trained personnel or under their supervision.
• Handle (13) and protective tube (14) are not included in the scope of supply (see accessories).
Prior to assembly of the handle kit, switch off the unit by the main switch (2)
to cool down. Machine switches off automatically.
120
Disconnect power supply cord (1) form the line/mains.
230
• Handle kit assembly
1 Push handle (13) onto the holder (7).
Loosen the four fastening screws (8) (do not remove).
2
Push the protective tube (14) onto the heating element tube (5)
3
and move in the opening for fastening screws (8).
4 Turn the protective tube (14) as far as it will go.
5 Tighten the four fastening screws (8).
2
Changing the heating element
120
230
120
230
1
5
22
3
2
6
4
3
7
and allow the device
1
5
4
8