Inhaltsverzeichnis
Werbung
MIDI Data Format
2.1.5 PLG150-AN Native parameter change
This message sets parameters unique to the PLG150-AN.
Each message can set a single parameter. The message format is as follows.
11110000
F0H
43H
01000011
1NH
0001nnnn
5CH
01011100
GGH
0ggggggg
0mmmmmmm
MMH
LLH
0lllllll
0vvvvvvv
VVH
:
:
F7H
11110111
For parameters whose Data Size is 2 or 4, the appropriate amount of data will
be transmitted as indicated by Size.
2.1.5.1 PLG150-AN Native System parameter change
This message sets the PLG150-AN SYSTEM block (see Tables <2-1> and
<2-2>).
2.1.5.2 PLG150-AN Native Part parameter change
This message sets the PLG150-AN MULTI PART block (see Tables <2-1>
and <2-3>).
2.1.5.3 AN1x System parameter change
This message sets the PLG150-AN original System block (see Tables <2-1>
and <2-4>).
2.1.5.4 Current Common parameter change
This message sets the Common block of the voice is sounding currently (see
Tables <2-1> and <2-5>).
2.1.5.5 Current Scene parameter change
This message sets the Scene block of the voice is sounding currently (see
Tables <2-1> and <2-6>).
2.1.5.6 Current Step SEQ Pattern parameter change
This message sets the Step SEQ block of the voice is sounding currently (see
Tables <2-1> and <2-7>).
2.2 Bulk dump
This device uses only the following bulk dump messages.
[ XG BULK DUMP ]
1) XG System bulk dump
2) Multi Part bulk dump
[ PLG150-AN NATIVE BULK DUMP ]
1) PLG150-AN Native System bulk dump
2) PLG150-AN Native Part bulk dump
3) AN1x Sytem bulk dump
4) Current Common bulk dump
5) Current Scene bulk dump
6) Current Step Seq Pattern bulk dump
7) User Step Seq Pattern
8) User Voice
And the following bulk dump messages are received and changed as data of
the PLG150-AN.
[ AN1x BULK DUMP ]
1) AN1x Sytem bulk dump
2) AN1x Current Common bulk dump
3) AN1x Current Scene bulk dump
4) AN1x Current Step Seq Pattern bulk dump
5) AN1x User Step Seq Pattern
6) AN1x User Voice
54
Exclusive status
YAMAHA ID
N:Device Number
Model ID
Address High
Address Mid
Address Low
Data
End of Exclusive
2.2.1 XG bulk dump
This message sets XG-related parameters. Unlike parameter change mes-
sages, a single message can modify multiple parameters.
This message format is as follows.
F0H
Exclusive status
11110000
01000011
43H
YAMAHA ID
0NH
N:Device Number
0000nnnn
4CH
Model ID
01001100
0sssssss
SSH
ByteCountMSB
TTH
ByteCountLSB
0ttttttt
0ggggggg
GGH
Address High
MMH
Address Mid
0mmmmmmm
LLH
Address Low
0lllllll
VVH
Data
0vvvvvvv
:
:
0kkkkkkk
KKH
Check-sum
F7H
End of Exclusive
11110111
Address and Byte Count are given in tables <1-n>.
Byte Count is indicated by the total size of the Data in tables <1-n>.
Bulk dump is received when the beginning of the block is specified in
"Address."
"Block" indicates the unit of the data string that is indicated in tables <1-n>
as "Total Size."
Check sum is the value that produces a lower 7 bits of 0 when ths Start
Address, Byte Count, Data, and the Check sum itself are added.
2.2.1.1 XG System bulk dump
This message sets the XG SYSTEM block (see Tables <1-1> and <1-2>).
2.2.1.2 Multi Part bulk dump
This message sets the MULTI PART block (see Tables <1-1> and <1-3>).
2.2.2 PLG150-AN Native Bulk Dump
This message sets the special parameters for PLG150-AN.
Unlike Parameter change, one message can modify multiple parameters.
F0H
Exclusive status
11110000
43H
YAMAHA ID
01000011
0000nnnn
0NH
N:Device Number
5CH
Model ID
01011100
0sssssss
SSH
ByteCountMSB
TTH
ByteCountLSB
0ttttttt
0ggggggg
GGH
Address High
MMH
Address Mid
0mmmmmmm
LLH
Address Low
0lllllll
0vvvvvvv
VVH
Data
:
:
0kkkkkkk
KKH
Check-sum
F7H
End of Exclusive
11110111
The detail are the same as for 2.2.1 XG Bulk Dump. However, see Tables <2-
n> for the Address, Byte, Count, and block.
2.2.2.1 PLG150-AN Naitve System bulk dump
This message sets the PLG150-AN SYSTEM block (see Tables <2-1> and
<2-2>).
2.2.2.2 PLG150-AN Native Part bulk dump
This message sets the PLG150-AN MULTI PART block (see Tables <2-1>
and <2-3>).
2.2.2.3 AN1x System bulk dump
This message sets the PLG150-AN original System block (see Tables <2-1>
and <2-4>).
2.2.2.4 Current Common bulk dump
This message sets the Common block of the voice is sounding currently (see
Tables <2-1> and <2-5>).
2.2.2.5 Current Scene bulk dump
This message sets the Scene block of the voice is sounding currently (see
Tables <2-1> and <2-6>).
2.2.2.6 Current Step Seq Pattern bulk dump
This message sets the Step SEQ block of the voice is sounding currently (see
Tables <2-1> and <2-7>).
2.2.2.7 User Voice bulk dump
This message sets the PLG150-AN original User Voice block (see Tables
<2-1> and <2-8>).
2.2.2.8 User Pattern bulk dump
This message sets the PLG150-AN original User Step Seq Pattern block (see
Tables <2-1> and <2-9>).
Werbung
Inhaltsverzeichnis
