Inhaltsverzeichnis
Werbung
Specifications
TONE GENERATOR/MODULES :
POLYPHONY :
NUMBER OF VOICES :
INTERFACE :
EFFECTOR :
DIMENSIONS (W x H x D) : 138.5 x 89.0 x 8.5mm
WEIGHT :
POWER REQUIREMENTS : 320mA
INCLUDED ITEMS :
About the Included Floppy Disks
The three included floppy disks contain editing software for the PLG150-AN as well as demonstra-
tion songs and Voice/Performance data for the "mother" device.
To use the editing software and transfer the song/Voice/Performance data to your particular "mother"
device, you should have a computer (running Windows 95/98) with a MIDI interface, with the MIDI
OUT on the interface connected to the MIDI IN of the "mother" device. You should also have
XGworks (v3.0 or higher) or XGworks lite installed to your computer; this is necessary to use the
editing software (page 17). For playing back the demonstration songs and transferring the Voice/
Performance data, you can use any compatible sequence software (such as XGworks/XGworks lite)
or hardware sequencer capable of sending bulk data. Insert Disk #1 into the computer and start the
installation.
The following software is included on the disks:
14
Analog Physical Modeling, 2VCO(OSCILLATOR & FM), Ring Modulator,
Noise, VCF(FEG), VCA(AEG), PEG, 2LFO, Arpeggio/Step Sequencer
Generator, 4 Track FreeEG
5 notes maximum (latest note priority; polyphony is expandable *1)
*1 Depending on the particular "mother" device, up to eight additional
boards can be installed, for a total of 40-note polyphony. On the CS6x,
for example, two boards can be installed for a maximum of 10 notes; on
the MU128, three boards can be installed for a maximum of 15 notes.
236 XG voices (AN-XG/A, AN-XG/B)
256 Preset voices
128 User voices
XG Plug-in connector
Guitar Amp.Simulator (Distortion)
3-Band EQ
XG Part EQ
65g
Owner's Manual, Floppy disk (3)
* Specifications subject to change without notice.
Werbung
Inhaltsverzeichnis
