Get Started; Install The Batteries; Recharge The Batteries; Recharge The Batteries Using The Philips Power Supply - Philips LFH 9600 Kurzreferenz

2

Get started

2.1

Install the batteries

The Digital Pocket Memo can be operated with the two rechargeable AAA batteries delivered
with the product. Standard (non-rechargeable) AAA alkaline batteries may also be used.
The Digital Pocket Memo must be in the
1
position.
Open the battery compartment on the back
2
of the Digital Pocket Memo by sliding it
outwards then folding it up.
Insert the two AAA batteries. The correct
3
polarity is indicated on the inside of the
battery compartment cover.
Close the battery compartment by folding it back and sliding the battery compartment cover
4
inside until it clicks.
Important: Do not mix battery types! Use two rechargeable batteries or two non-
C
rechargeable alkaline batteries.
2.2

Recharge the batteries

The Digital Pocket Memo can be operated with the rechargeable Philips AAA batteries. To
recharge these batteries, use the

2.2.1 Recharge the batteries using the Philips power supply

To recharge the batteries with the Philips power supply:
Connect the Philips power supply to the main power supply.
1
Connect the the Digital Pocket Memo to the Philips power supply.
2
D Note: It is okay to continue using the Digital Pocket Memo during recharge. The batteries
will be recharged while you work, and will continue recharging even when the Digital Pocket
Memo is turned off.
6
OFF
Philips power supply, the
1
2
Docking Station or the USB cable.
Quick reference guide