Napoleon LE485SB Anleitung Seite 40

56
WARNING!
part of the gas system is replaced.
WARNING!
replaced or serviced. Do not smoke while performing this test, and remove all sources of igni on. See
Leak Tes ng Diagram for areas to check. Turn all burner controls to the o posi on. Turn gas supply valve
on.
Brush a half-and-half solu on of li uid soap and water onto all oints and connec ons of the regulator,
hose, manifolds and valves.
Bubbles will indicate a gas leak. Either ghten the loose oint or have the part replaced with one
recommended by the Napoleon Customer Solu ons department and have the grill inspected by a
STOP
cer ed gas installer.
If the leak cannot be stopped,
inspected by a cer
www.napoleongrills.com
: This must be done before ini al use, annually, and whenever any gas components are
ed gas installer or dealer. Do not use the grill un l the leak has been corrected.
, disconnect it, and have the grill
N415-0220CE-GB-DE OCT 23.17