Measuring With The Za-Tec Za - ZA-TEC ZA 6-2 Bedienungsanleitung

7.6 Resistance ranges
Overload protection: 1000 V
Measuring range OL indication
600.0 Ω
6.000 kΩ
60.00 kΩ
600.0 kΩ
6.000 MΩ
40.00 MΩ
* Measured values > 10 MΩ might cause changing values on the display
(max. ± 50 digits).
7.7 Diode testing
Overload protection: 1000 V
Max. no-load voltage: 1.8 V
Measuring range OL indication
1.500 V
7.8 Continuity testing
Overload protection: 1000 V
The built-in buzzer sounds in the case of a resistance R less than 20 Ω up to 200
Ω. For a resistance R higher than 200 Ω, the buzzer does not emit an acoustic
signal. Additionally, in case of continuity, the red LED N on the top side of the
device lights.
Measuring range OL indication
600.0 Ω
7.9 Capacity ranges
Conditions: capacitors discharged and connected in accordance with the polar-
ity stated.
Overload protection: 1000 V
Measuring range OL indication
1.000 µF
10.00 µF
100.0 µF
1.000 mF
10.00 mF
7.10 Frequency ranges
Overload protection: 1000 V
Measuring range
100.00 Hz
1000.0 Hz
10.000 kHz
100.00 kHz
Minimum frequency: 1 Hz
Minimum sensitivity: > 5 V
7.11 PEAK HOLD for AC V/ AC A
Please add ± 150 digits to the specified measuring accuracy.
Square-wave signals are not specified.
8.

Measuring with the ZA-TEC ZA 6-2

8.1 Preparation for measuring
Store and use the ZA-TEC ZA 6-2 only under the correct temperature conditions
stated. Always avoid longer exposure to sunlight.
- Check the rated voltage and rated current stated on the safety measuring
leads. The safety measuring leads supplied with the unit are suitable for the
11/ 2016
AC/ DC
Resolution
660.0 Ω
6.600 kΩ 0.001 kΩ
66.00 kΩ 0.01 kΩ
660.0 kΩ 0.1 kΩ
6.000 MΩ 0.001 MΩ
40.00 MΩ 0.01 MΩ
AC/ DC
Resolution
1.550 V 0.001 V
AC/ DC
Resolution
660.0 Ω
AC/ DC
Resolution
1.100 µF 0.001 µF
11.00 µF 0.01 µF
110.0 µF 0.1 µF
1.100 mF 0.001 mF
11.00 mF 0.01 mF
AC/ DC
OL indication Resolution
100.00 Hz
1000.0 Hz
10.000 kHz 0.001 kHz
100.00 kHz
for V
eff AC
> 20 V for V
eff
to 100 kHz)
> 0,6 A for A
eff
ZA-TEC ZA 6-2
0.1 Ω ± (0.9 % of reading + 8 digits)
± (0.9 % of reading + 5 digits)
± (0.9 % of reading + 5 digits)
± (0.9 % of reading + 5 digits)
± (0.9 % of reading + 5 digits)
± (1.5 % of reading + 8 digits)*
± (0.9 % of reading + 5 digits)
0.1 Ω ± (0.9 % of reading + 8 digits)
± (1.9 % of reading + 8 digits)
± (1.9 % of reading + 5 digits)
± (1.9 % of reading + 5 digits)
± (1.9 % of reading + 5 digits)
± (1.9 % of reading + 5 digits)
0.01 Hz ± (0.1 % of reading + 5 digits)
0.1 Hz ± (0.1 % of reading + 5 digits)
± (0.1 % of reading + 5 digits)
0.01 kHz ± (0.1 % of reading + 5 digits)
(1 Hz - 10 kHz)
(10 kHz - 50 kHz), not specified for (50 kHz
AC
AC
Measurement accuracy
Measurement accuracy
Measurement accuracy
Measurement accuracy
Measurement accuracy

23