Assembling The Grill - tepro Vista Bedienungsanleitung

t

Assembling the grill

1� Unpack BBQ
Unpack the BBQ and dispose of
all packaging materials� Keep the
packaging materials out of the reach of
children and dispose of them according
to regulations after BBQ assembly�
2� notes on screws and nuts
All the parts are held together with
M5x12 screws (A) and M5 nuts (B)� In
total, 26 screws and nuts are required
for assembly� During assembly, stick
the screws through the openings from
outside, so that the nuts are on the
inside�
3� Attaching the stand column to the
stand foot
Place the stand column (7) over the
retaining plates on the stand foot (9)
and fix it in place with four M5x12 (A)
screws and M5 nuts (B) �
4� Sliding the ash drawer into the
stand column
Slide the ash drawer (8) into the
opening at the base of the stand
column (7)�
20
5� Assembling the funnel-shaped fire
bowl
Join the four elements for the fire bowl
(6) one after another using a total of
eight M5x12 screws (A) and M5 nuts
(B) � Tighten the screws only by hand�
6� Assembling the windshield and
attaching it to the fire bowl
The right (2) and the left windshield (3)
are bent at the back and are placed
behind the rear windshield (1)� Join the
right, left, and rear windshields with the
M5x12 screws (A) and M5 nuts (B)�
Attach the assembled windshield using
the screws and nuts to the elements
of the fire bowl (6)� Tighten the screws
only by hand�