Description Of Symbols; Specification; General Safety Warnings - Silverline 269131 Originalbetriebsanleitung

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product . This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual .

Description of Symbols

The rating plate on your tool may show symbols . These represent important information about the
product or instructions on its use .
Wear hearing protection .
Wear eye protection .
Wear breathing protection .
Wear head protection .
Wear hand protection .
Read instruction manual .
Caution!
DO NOT use on scaffolding or ladders
Important safety devices! Ensure correct function, maintain in accordance with
instructions and DO NOT disable!
DO NOT use with compressed gas cylinders!
Conforms to relevant legislation and safety standards
Environmental Protection
Air tools must not be disposed of with household waste . Air tools may contain traces
of tool oil and other lubricants and so must be recycled accordingly

Specification

Working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 – 7bar (60 – 100psi)
Maximum pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 .5bar (108psi)
Air inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1⁄ 4 " BSP quick connector
Nail/staple size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .brad nails: 18 Gauge, 10 – 32mm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . staples: 18 Gauge, 13 – 32mm
Magazine capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 nails/staples
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 .1kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration information:
Sound pressure L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95.5dB(A)
PA
Sound power L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82.5dB(A)
WA
Uncertainty K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3dB
Weighted vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 .0m/s
Uncertainty K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 .63%
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary .
4
0,079"(2mm)
10 mm
15 mm
20 mm
25 mm
30 mm
32 mm
1,26 X 1,05mm
(0,050")(0,041")
Calibre 18.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time
of exposure if necessary . If sound levels are uncomfortable, even with ear protection, stop using the
tool immediately and check the ear protection is correctly fitted and provides the correct level of
sound attenuation for the level of sound produced by your tool .
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling
and reduced ability to grip. Long term exposure can lead to a chronic condition. If necessary, limit
the length of time exposed to vibration and use anti-vibration gloves . Do not operate the tool with
hands below a normal comfortable temperature, as vibration will have a greater effect . Use the
figures provided in the specification relating to vibration to calculate the duration and frequency
of operating the tool .
Sound and vibration levels in the specification are determined according to EN60745 or similar
international standards. The figures represent normal use for the tool in normal working conditions.
A poorly maintained, incorrectly assembled, or misused tool may produce increased levels of noise
and vibration . www .osha .europa .eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods of time .

General Safety Warnings

WARNING Read all safety warnings and all instructions . Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
WARNING: This appliance is not intended for use by persons (including children) with reduced,
physical or mental capabilities or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety .
Children must be supervised to ensure that they do not play with the appliance .
Save all warnings and instructions for future reference.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents .
b) Do not operate tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
c) Keep children and bystanders away while operating a powered tool. Distractions can cause
you to lose control .
2) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a powered
tool. Do not use a powered tool while you are tired or under the influence of drugs, alcohol
or medication . A moment of inattention while operating a powered tool may result in serious
personal injury .
b) Use personal protective equipment. Always wear eye protection . Protective equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions
will reduce personal injuries .
c) Prevent unintentional starting. Ensure the switch is in the off-position when not operating the
tool and make use of other safety features which prevent unintentional starting
d) Remove any adjusting key or wrench before turning the powered tool on. A wrench or a key
left attached to a rotating part of the tool may result in personal injury .
e) Do not overreach. Keep proper footing and balance at all times . This enables better control of
the tool in unexpected situations .
f) Dress properly. Do not wear loose clothing or jewelry . Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-related
hazards .
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
2
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition.
If necessary limit the length of time exposed to vibration. Use the figures provided in the
specification relating to vibration if provided to calculate the duration and frequency of operating
the tool. The 2002/44/EC directive relating to vibration in the workplace may provide useful
information even for domestic use of tools. In the first instance of feeling uncomfortable due to
vibration STOP using the tool immediately.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
Original Instructions
(3/8")
(5-8")
(3/4")
(1")
(1-3/16")
(1-1/4")