Inhaltsverzeichnis
Werbung
•
•
I
For detail operation procedure, please
download the manual from software CD!!
INSTALL THE SOFTWARE
Insert the RS232 software CD then the installation program should start
automatically.
A) Install Software: Run the set up installation program
B) Brow CD-ROM :Browse the CD-ROM using Windows
C) Manual
:To view the detail operation manual
D) Exit
:Exit the software installation
E) USB Driver
: Install USB Driver. For USB cable, be sure to
Note:
install corresponding driver per your 0/S.
Need Windows 98/2000/NT/XP operation system with at least one
available COM. Port.
ATTACH THE CABLE
Fit the cable to your computer by connecting it to the serial port. Usually
COM1 is for most PC.
____,.o;Bt36/4.~:---
MAIN SCREEN
When you enter the program but without any meters connected, the
reading in two blocks showed without title. (Diagram A)
EXAMPLE: Psychrometer (Dual K Type Input)
While 8746 connecting with your PC, you will see "Air" and "RH"
displayed. (Diagram B)
Left Side
Right Side
:Display AIR Temperature
:Display RH (Humidity Value)
• If a meter could export more than two parameters, users could
choose any two of them to set alarm values.(Diagram B-1)
• Click" Alarm SW" button to active the limit setting (Diagram C).
Afterwards, High/ low limit can be keyed in directly or by clicking
A
to increase or
T
to decrease figures.
2
• Real time "Air" temperature shows at the left side temperature
block (Diagram D).
• Alarm will be sparkling in red if a measured value exceeds the high
limit or below the low limit (Diagram D).
3
START RECORDING
Press START button or Alt+S to active the recording. When starting,
the text "Logging Data" will appear on the left corner of the graphic.
All parameters will show with different color curves. Different color
texts show below the chart indicate the meaning of each curve. For
example: black curve is Air, red curve is RH ...... etc.(See Diagram E)
RETRIEVE FILE
1. Clicking " Retrieve File" on the tool bar or press Alt+R.
2. Double-click the folder that contains the document you want to
open. Click the document name, and then click OK.
3. All documents are saved as *.txt file types, no other types are valid.
4
Werbung
Inhaltsverzeichnis
