Bosch AKE 35-19 PRO Originalbetriebsanleitung Seite 20

OBJ_BUCH-2379-001.book Page 20 Thursday, March 2, 2017 1:02 PM
20 | English
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The power tool is intended for sawing wood such as wooden
beams, planks, branches, tree trunks, etc., and for sawing of
trees. Cuts can be sawed with or across the grain.
This power tool is not suitable for sawing mineral materials.
Delivery Scope
Carefully remove the power tool from its packaging and check
if the following parts are complete:
– Chain saw
– Cover
– Chain
– Chain bar
– Chain guard
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
Technical Data
Chain saw
Article number
Rated power input
Chain speed (no-load)
Blade length
Chain type
Drive link thickness
Amount of drive links
Oil reservoir capacity
Toolless chain tensioning (SDS)
Automatic chain oiler
Nose sprocket
Kickback brake
Metal gripping teeth
***measured with chain bar and chain
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0.25 ohm.
F 016 L81 137 | (2.3.17)
1 Rear handle (insulated gripping surface)
2 On/Off switch
3 Lock-off button for On/Off switch
4 Oil filler cap
5 Activation lever for kickback brake (hand guard)
6 Deactivation mark "for kickback brake"
7 Front handle (insulated gripping surface)
8 Nose sprocket
9 Chain guard
10 Saw chain
11 Chain bar
12 Gripping teeth
13 Chain-tensioning ring (red)
14 Locking knob
15 Cover
16 Serial number
17 Symbol for rotation and cutting direction
18 Drive sprocket
19 Oil outlet
20 Guide fin for chain bar
21 Fastening bolt
22 Chain tensioning catch
23 Chain catch bolt
24 Power plug**
25 Extension cable*
** country specific
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
AKE 35-19 PRO
0 600 836 7..
W
m/s
cm
3/8" – 91
mm 1.3 (0.05")
ml
AKE 40-19 PRO
0 600 836 8..
1900 1900
13 13
35 40
3/8" – 91
1.3 (0.05)
52 57
200 200
 
 
 
 
 
Bosch Power Tools