Safety Warnings - Märklin 36330 Bedienungsanleitung

Function
G Possible operating systems:
6646/6647 Märklin Transformer, Märklin Delta,
Märklin Digital, Märklin Systems.
G Recognition of the mode of operation: automatic.
G Addresses that can be set: 01 – 80.
Address set at the factory: 33.
G Adjustable acceleration.
G Adjustable Braking delay.
G Adjustable maximum speed.
G Setting the locomotive parameters electronically with
the Control Unit, Mobile Station or Central Station.
G Headlights, changing over with the direction
of travel.
Maintenance procedures that become necessary
with normal operation of the locomotive are des-
cribed below. Please see your authorized Märklin
dealer for repairs or spare parts.
No warranty or damage claims shall be accepted in those cases
where parts neither manufactured nor approved by Märklin have been
installed in Märklin products or where Märklin products have been
converted in such a way that the non-Märklin parts or the conversion
were causal to the defects and / or damage arising. The burden of
presenting evidence and the burden of proof thereof, that the instal-
lation of non-Märklin parts or the conversion in or of Märklin products
was not causal to the defects and / or damage arising, is borne by
the person and / or company responsible for the installation and / or
conversion, or by the customer.

Safety Warnings

G This locomotive is to be used only with an operating
system designed for it (Märklin 6646/6647
AC transformer, Märklin Delta, Märklin Digital
or Märklin Systems).
G This locomotive must never be supplied with
power from more than one transformer.
G Pay close attention to the safety warnings in the
instructions for your operating system.
5