Replacement Of The Motor Protection Filter; Replacement Of Hepa Filter - Fakir prestige TS 2000 Bedienungsanleitung

Replacement of the mo-
tor protection filter
H
Replacement of HEPA
filter
I
Cleaning and Maintenance
If a larger motor protection filter is available in the dust
bag package, please cut this off so that it shall be suit-
able for the appliance. Ensure that the motor protec-
tion filter always cover the vacuum motor completely
and that no dust can reach the motor.
1. Open the dust compartment and remove the dust
bag (see "Replacing the dust bag").
2. Press the noise insulation activation button [H]
and tilt it forward to remove the motor protection
filter.
3. Remove the motor protection filter and install a
new motor protection filter.
4. Close the motor protection filter grill again.
5. Place the dust bag again and close the dust com-
partment lid (see "Replacing the dust bag").
Replacement period: Approx. after 6 months.
HEPA filter is located under the air outlet grill.
1. Remove the air outlet grill by pressing the buttons
[I].
2. Remove the HEPA/ULPA filter [J] and replace it
with a new HEPA/ULPA filter.
3. Reinstall air outlet grill and press it until a click is
heard.
prestige | TS 2000
HEPA* = HIGH EFFICIENCY PARTICULATE
prestige | TS 2400
ULPA* = ULTRA LOW PENETRATION AIR FILTER
J
Attention!
Note!
40