Further Information - Lancom Systems vRouter Installationsanleitung

Further Information

This chapter contains further information on the administration of the
LANCOM vRouter. This includes integrating the vRouter into the LANCOM
Management Cloud, and resetting the vRouter.
Resetting the vRouter
If you want to reconfigure the vRouter irrespective of any settings you have
made, you can reset the vRouter to its default settings without affecting
the license. You can perform the reset in the following ways:
Reset via the Command Line Interface (CLI)
Open the vRouter VGA command line interface on the ESXi server, or
connect to the vRouter via SSH. Once you have logged on, you perform the
reset with the command do /other/reset. If a main password has been set
for the device, this is will be requested before the command is executed.
After resetting, the vRouter boots.
5
Resetting the vRouter deletes all of the configuration settings,
passwords and certificates.
Resetting via the Command Line Interface (CLI) while Retaining
Certificates and the Main Device Password
In order to retain the main password and any uploaded certificates on the
vRouter, you execute a command in the command line interface of the
vRouter. Open the vRouter VGA command line interface on the ESXi server,
or connect to the vRouter via SSH. After logging on, enter the following
command from the root of the directory tree: default -r .
35
LANCOM vRouter Installation Guide – Further Information