Lancom Systems vRouter Installationsanleitung Seite 33

LANCOM vRouter Installation Guide – Initial Setup
Configuration with WEBconfig
WEBconfig is the Web-based configuration interface of LCOS. To start
the configuration in WEBconfig, open a Web browser and type in the IP
address assigned during the installation to your browser's address bar.
Basic Settings
If the device has not yet been configured (e.g. during deployment on the
ESXi server), a basic setup wizard starts automatically for the configuration
of basic parameters, such as the main device password, device name, IP
address, etc.
5
The main device password is essential for resetting the vRouter.
After running the basic setup wizard, you can continue with the configu-
ration either manually or by means of the other Wizards.
32