Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4
The item may or may not be displayed depending on the VMware
ESXi version and license. These settings are optional and can be
entered later when you configure the vRouter.
11. The selected options are presented again in summary. If you wish to
make any changes, use the menu on the left-hand side to jump back to the
corresponding dialog of the Installation Wizard. If you want to start the
vRouter directly after installing it, activate the checkbox Power on the
virtual machine after creation. Use the button Finish to exit the Instal-
lation Wizard. This then starts the vRouter on the ESXi server based on the
specified information.
12. After the Installation Wizard is finished, the vRouter is ready for
use. If the network assigned to Ethernet1 contains a DHCP server, or if
an IP address was assigned during the configuration, the vRouter can be
accessed and configured over this network.
29
LANCOM vRouter Installation Guide – Installation
Werbung
