Storage; Disposal - Dräger FPS 7000 Gebrauchsanweisung

Storage

5 Storage
Loosen the straps of the head harness as far as possible.
Make sure that the facepiece is dry.
Store the facepiece in its bag or storage box.
Store the facepiece in a dry, dust-free place where it will not be
deformed.
Keep the facepiece out of direct sunlight and heat.
Storage temperature: 5 °F to 77 °F (-15 °C to 25 °C).
Observe ISO 2230 and national guidelines for storage,
maintenance and cleaning of rubber products.
Dräger rubber products are treated with an agent to protect against
premature ageing which in some cases is visible as a grey-white
coating. This coating can be washed off with a brush and soapy water.
6

Disposal

Dispose of the facepiece according to local waste disposal
regulations.
260 (Use Instructions for NIOSH-approved full facepieces) Dräger FPS 7000