Product Description And Specifications - Bosch 0 607 560...500 Originalbetriebsanleitung

OBJ_DOKU-30379-003.fm Page 14 Wednesday, June 11, 2014 10:12 AM
14 | English
Symbol Meaning
QC Quick-change chuck
Symbol for hexagon socket

Symbol for external drive
US fine thread
UNF (Unified National Fine
Thread Series)
G Whitworth thread
NPT National pipe thread
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the fold-out
page with the illustration of the pneumatic tool and leave it
open.
Intended Use
0 607 560 500
The pneumatic tool is intended for knocking off tiles and plas-
ter, for making openings in walls and for separating pipes and
sheet metal.
0 607 560 502
The pneumatic tool is intended for knocking off roughcast, ex-
posing reinforced steel, as well as for roughing and cleaning
stone, concrete and steel.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Air outlet with silencer
3 Connection socket at air intake
4 Hose fitting
5 Hose clamp
6 Supply-air hose
0 607 560 500
7 Tool holder
8 Retaining spring
9 Hook clip
0 607 560 502
10 Needles
11 Guide sleeve
12 Pan head screw with lock nut
13 Needle holder
14 Apertured disc
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
1 609 92A 0TG | (11.6.14)
Noise/Vibration Information
0 607 560 ...
Sound emission values determined according to
EN ISO 15744.
Tool holder
Typically the A-weighted noise
level of the pneumatic tool is:
Sound pressure level L
Sound power level L
Connecting thread Uncertainty k
Wear hearing protection!
Vibration total values a
determined according to EN 28927:
Chiselling:
a
h
K
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN ISO 11148 and may be used to compare one
pneumatic tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the pneumatic tool. However if the pneumatic
tool is used for different applications, with different accesso-
ries or insertion tools or is poorly maintained, the vibration
emission may differ. This may significantly increase the expo-
sure level over the total working period.
An exact estimation of the level of exposure to vibration
should also take into account the times when the pneumatic
tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintaining the pneu-
matic tool and the accessories, keeping the hands warm, or-
ganisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical data" complies with all applicable
provisions of the directive 2006/42/EC including its amend-
ments and is in conformity with the following standards:
EN ISO 11148-4.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 12.06.2014
... 500 ... 502
dB(A) 91
pA
dB(A) 101
wA
dB 1.0
(triax vector sum) and uncertainty K
h
2
m/s 6.0
2
m/s 1.0
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools
93
103
1.0
12.5
1.0