Step 3: Manual color mix
Adjust the desired DMX values (0 to 255) for the spotlights selected using the R, G, B, W, A, UV/D faders. The
availability of individual control functions depends on the type of spotlight used and on the assignment to the
channel functions (see step 1).
Step 4: Direct color mix
Alternatively, the controller has a MIX fader which allows fast access to internal RGBW color mixes in a single
movement. For warm colors and UV content, an additional A/UV MIX fader controls the amount of amber and
violet components in the output.
Step 5: Automatic color change programs
Use the RUN MODE to enable automatic mode (AUTO LED lights up). Then use the MACRO fader to select one
of the eight programs. The program speed can be set with the SPEED fader.
Step 6: Sound control
The internal color change programs can be controlled to the rhythm of music picked up via the integrated
microphone. Use the RUN MODE to enable sound control mode (SOUND LED lights up), then select the desired
program with the MACRO fader. You can use the SOUND SENSITIVITY fader to match the sensitivity
Step 7: Stroboscope effect
The STROBE button generates a white stroboscope effect. Use the STROBE SPEED fader to adjust the flash rate
from 1 to 20 Hz. If the fader is set to 0, there will be no data output. To deactivate the strobe effect, press the
STROBE button once again.
Step 8: Blackout function
Press the BLACKOUT button to black out all spotlights. The button's LED lights up and all control channels are
set to the output value zero. To switch the spotlights back on again, press the BLACKOUT button once again.
The product is maintenance-free, except for occasional cleaning. You can use a lint-free, slightly dampened cloth
for cleaning. Refer all servicing to qualified personnel.
Power supply:
Power consumption:
Protection class:
Control channels:
Controls:
DMX modes:
Sound-control:
DMX512 output:
Dimensions (L x W x H):
Weight:
Specifications are subject to change without notice due to product improvements.
Pin connection:
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
9-12V DC, 300 mA connected to 100-240 V AC, 50/60 Hz via included power adapter
<10 W
III
28
R/G/B/W/A/UV/D, RGBWAUV mix, macros, strobe effect
RGBD, RGBWD, RGBWAD, RGBWAUV, DRGBWAUV, RGBWAUV/D
via built-in microphone
3-pin XLR connector
115 x 250 x 55 mm
0.93 kg
13 • EN