WIKA PGS23 Betriebsanleitung Seite 13

5. Commissioning, operation
The measuring line should be designed and installed so that the loads occurring
due to expansion, vibration and thermal effects can be absorbed. With gaseous
media, a drain should be provided at the lowest point; with liquid media, a vent
should be provided at the highest point.
The measuring instruments must be mounted in the common mounting position
per EN 837-1, with a max. permissible incline of 5° on all sides.
5.1.12 Measuring assemblies
Proven measuring assemblies for various types of media.
Liquid media
Filling of the liquid
measuring
line
Examples
conden-
sate
Pressure
gauge above
the tapping
point
Pressure
gauge below
the tapping
point
Operating instructions pressure gauges with switch contact models 821, 851 or 830 E
liquid com-
with pletely
vapour vapour-
ised
boiling "liquid
liquids gases"
Gaseous media
gase- partially
ous condensed
(damp)
dry air moist air
flue gases
EN
complete-
ly con-
densed
Steam
13