Programming Keys - Abus Secvest IP Kurzanleitung

A

Programming keys

B
Tamper switch
A cover tamper switch (B) and a wall tamper switch protect the control panel
from unauthorised opening and removal from the wall.
C CON1
CON1 jumper connection "FIT DISABLE TAMP" (C)
If you set the jumper on both contacts, you deactivate the wall
removal contact.
(This may be helpful during programming.)
D CON2
CON2 jumper (D) must be in the "-" position (factory setting).
E
DIP switch SW6
Switch positions 4/5/7/8 must remain in the factory settings to guarantee
functioning.
Switch Options
1 Supervision
2 Supervision time
3 Jamming detection
4
5
6 LED mode
7
8 Acoustic signalling
SELECT SET
Factory settings
ON
ON
ON
OFF
ON
OFF
OFF
ON
ESC/DEL
SW4
"OFF" position
Off
Long 3 h
Off
Display on
Off
CON2
VSEL
"ON" position
On
Short 20 min
On
Display off
On
37