Inserting The Battery - Hama TH-200 Bedienungsanleitung

G Operating instruction
Controls and Displays
1. Display
2. Temperature trend display (h/°C)
3. MODE button
4. MAX/MIN button
5. SNZ (snooze) button
6. UP button (increase set value)
7. DOWN button (decrease set value)
8. LIGHT button (display light)
9. Battery compartment
10. Stand (removable)
11. Measurement openings (do not cover)
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please
keep these instructions in a safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to
specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
• TH-200 LCD thermometer/hygrometer
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating, and only use it in a dry
environment.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in
direct sunlight.
• Do not operate the product outside the power limits given in the specifications.
• Do not drop the product and do not expose it to any major shocks.
• Do not attempt to service or repair the product yourself. Leave any and all service
work to qualified experts.
• Do not modify the product in any way. Doing so voids the warranty.
Warning - Batteries
• Immediately remove and dispose of dead batteries from the product.
• Only use batteries (or rechargeable batteries) that match the specified type.
• When inserting batteries, note the correct polarity (+ and - markings) and insert
the batteries accordingly. Failure to do so could result in the batteries leaking
or exploding.
4. Getting Started

Inserting the battery

• Open the battery compartment (9), insert the battery/batteries, ensuring that
the batteries are inserted correctly in terms of polarity, and then close the battery
compartment (9). The thermometer is now ready for use.