ATIKA ALH 2500 Bedienungsanleitung Seite 11

A s s e m b l y
A s s e m b l y
Description
1. Hopper opening for material to be shredded
2. Reset button / motor protection
3. On / Off switch
4. Direction of rotation selector switch
5. Power supply plug
6. Ventilation slots
7. Carriage
8. Ejection slot
10
8
Remove all parts from the
packaging.
Mount each of the two sup-
porting legs with two wash-
ers (No. 8) and self-locking
nuts (No. 2) using the nut
wrench supplied on the
housing.
Mount the wheel axle (No.
3) with the 2 screws M6 x 50
(No. 4), washers and nuts
using the socket wrench and
nut wrench supplied on the
carriage.
Push the wheels (No. 5)
onto the axle.
Fasten the wheel cover (No.
6) in the wheel axle using a
hammer.