Operation - Gardena PowerMax Li-40/41 Betriebsanleitung

3. OPERATION

Before you do operation:
To charge the battery:
(10)
(11) ß
(9)
E
ß
C
Battery charging indicator:
ß
L1
ß
B
6
5041-20.960.02.indb 6
WARNING! Risk of physical injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, remove the safety key and
use gloves before you attach the battery or transport the
product.
CAUTION!
Damage to the battery or the battery charger!
Overvoltage damages the battery and the battery charger.
v Make sure that you use the correct mains voltage.
Before you use the battery the first time, the battery must be fully
charged.
The lithium-ion battery can be charged in any state of charge and
the charging process can be disconnected at any time without to
damage the battery (no memory effect).
1. Connect the mains cable
2. Connect the mains cable
3. Connect the charger cable
When the charging control lamp
green once per second the battery is being charged.
When the charging control lamp
(8)
the battery is fully charged.
For charging time, see 7. TECHNICAL DATA.
4. Check the charge status regularly while you charge.
5. When the battery is fully charged, disconnect the battery
the battery charger
6. Disconnect the mains cable
Battery charging indicator during charging:
100 % charged
67 – 100 % charged
34 – 66 % charged
ß ß
L2 L3
0 – 33 % charged
Battery charging indicator during operation:
Push the button
67 – 100 % charged
ß
W
34 – 66 % charged
11 – 33 % charged
0 – 10 % charged
(10)
to the battery charger
(10) to a 230 V mains socket.
(8)
to the battery
(11) at the charger flashes
(11)
at the charger is lit green
ß
.
C
(10)
from the mains.
ß ß ß
, and lit
L1 L2 L3
ß ß ß
and lit, flashing
L1 L2 L3
ß ß
, flashing
L1 L2
ß
flashing
L1
ß
on the battery.
B
ß ß ß
, and lit
L1 L2 L3
ß ß
and lit
L1 L2
ß
lit
L1
ß
flashing
L1
ß
.
C
(9)
.
(9)
from
05.12.16 12:53
C