therm-ic SmartPack rc 1600 Gebrauchsanweisung Seite 28

I N S TR U C TI O N S FO R U S E / E N G LI S H
Turning the device on:
Briefly (approx. 1 sec.) press the "+" or "-" control
button (Fig. 1.3) to turn on the SmartPacks at the
lowest heat level.
Turning the device off:
 Press the "-" control button for a longer period of
time (3 seconds) (Fig. 1.3) to turn off the
SmartPacks.
 The SmartPack switches into POWER OFF
mode.
 No LED is illuminated on the heat setting display
(Fig. 1.2).
 The heat is off.
Changing the heat setting:
 The +/- control buttons (Fig. 1.3) allow you to set
3 different heat levels.
 Every time you push the "+" control button (Fig.
1.3), the heat level rises.
 Every time you push the "-" control button (Fig.
1.3), the heat level drops.
 The respective heat level is indicated by the
flashing of the heat setting display (Fig. 1.2) on
the SmartPacks
switched off
  
low heat level
  
moderate heat level
  
high heat level
  
Note:
Both SmartPacks can be used independently with
different heat levels.
Using the remote control
Changing the heat setting:
 The +/- control buttons (Fig. 3.2) allow you to set
three different heat levels.
 Every time you push the "+" control button
(Fig. 3.2), the heat level rises.
– 28 –