Note; Down Time; Random Generator - Vestamatic Rolltec Plus G/S 500 Montage- Und Bedienungsanleitung

Down time

By operating the combination of set and down button you can set the
down time.
Setting the down time can be performed as follows:
1. Press the set button first and keep it pressed, then:
A. Press the down button and keep it pressed to fast forward the
down time.
B. Shortly tap the down button to slow forward the down time.
or
2. Press the down button first and keep it pressed, then:
A. Press the set button and keep it pressed to fast reverse the
down time.
B. Shortly tap the set button to slow reverse the down time.
The display will now indicate the set value. Once the programming
buttons are no longer operated, the display will indicate the current
time again. Tapping the down button will check the set value and the
display will again indicate the previously set down time. After approx.
2 seconds, the display will indicate the current time again.
Basic functions
- 51 -
Basic functions
The random generator generates the so-called random time which
causes the roller shutters to move up or down with a deviation of
+/-15 minutes to the previously programmed times(*).
The "randomly" moving up and down roller shutters give the impres-
sion of an inhabited house and thus provide additional protection in
case the house owner is absent for an extended period of time.
Simply press the random button to activate the random generator.
The display will now indicate
a (Z) in the upper right hand
corner.

NOTE!

v v
The random generator will disable any previously set reverse
function (please see page 60).
Press the random button again to deactivate the random generator.
The random generator is now turned off, the (Z) in the display will dis-
appear and the roller shutter will move up and down accurately at the
times you have previously programmed.
(*)Annotation: If the Astro function is activated, the times will deviate
G G
(0ß8:0ß0Z
by +/-15 minutes from the actual sunrise and sunset
times.
- 52 -

Random generator