Herunterladen Inhalt Inhalt Diese Seite drucken

Health Hazard; Operating Determinations - Omnitronic C-50A Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für C-50A:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

By operating this speaker system, you can produce excessive sound pressure
levels that may lead to permanent hearing loss.
Keep away children and amateurs!
There are no serviceable parts inside the speaker system. Maintenance and service operations are only to
be carried out by authorized dealers.

3. OPERATING DETERMINATIONS

This speaker system is an active system which must only be used for permanent installations. This product is
allowed to be operated with an alternating current of 230 V AC, 50 Hz and was designed for indoor use only.
Please note: Only connect line level signals to active systems. Never connect the inputs with the speaker
outputs of a power amplifier!
The given maximum power of the speaker system describes short-term peaks the system can handle as a
maximum. The correspondent RMS power is - as of all comparable systems (also from other manufacturers)
- significantly lower. The maximum power of the speaker system must never be exceeded. When operating
the speaker system, please make sure that the loudspeakers always sound well. When distortions can be
heard, either the amplifier or the loudspeaker is overloaded. Overloads can quickly lead to amplifier or
speaker damage. In order to avoid damage, please reduce the volume immediately when distortions can be
heard. When speaker systems are destroyed by overload, the guarantee becomes void.
By operating speaker systems with an amplifier, you can produce excessive sound pressure levels that may
lead to permanent hearing loss.
Speaker systems must only be operated by trained persons.
Danger of Life due to crashing speaker systems or hearing loss due to excessive sound pressure
levels! The different local conditions have to be considered in terms of safety rules.
This speaker system must never be operated or stockpiled in surroundings where splash water, rain,
moisture or fog may harm the speaker system. When using smoke machines, make sure that the speaker
system is never exposed to the direct smoke jet and is installed in a distance of 0.5 meters between smoke
machine and speaker system.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
This speaker system must only be installed at a solid, plane, anti-slip, vibration-free, oscillation-free and fire-
resistant location.
When using stands, holders, tables or carts for installing this speaker system make sure that the speaker
system can be installed safely in order to avoid injury or damage.
Please note: When using this speaker system in public or industrial areas, a series of safety instructions
have to be followed that this manual can only give in part. The operator must therefore inform himself on the
current safety instructions and consider them.
This device is only allowed for an installation via the mounting bracket. In order to safeguard sufficient
ventilation, leave 50 cm of free space around the device.

HEALTH HAZARD!

WARNING!
14/20
00043576.DOC, Version 1.3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

C-80aC-60a

Inhaltsverzeichnis