Makita HM1802 Betriebsanleitung Seite 5

Noise
The typical A-weighted noise level determined according
to EN60745:
Model HM1802
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model HM1812
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model HM1802
Work mode: chiselling
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model HM1812
Work mode: chiselling
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
ENG905-1
): 95 dB (A)
pA
): 106 dB (A)
WA
): 96 dB (A)
pA
): 107 dB (A)
WA
ENG900-1
): 14.0 m/s
2
h, CHeq
2
): 6.5 m/s
2
h, CHeq
2
ENG901-1
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Electric Breaker
Model No./ Type: HM1802, HM1812
Specifications: see "SPECIFICATIONS" table.
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex VI.
Notified Body:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Identification number 0197
Model HM1802
Measured Sound Power Level: 106 dB (A)
Guaranteed Sound Power Level: 108 dB (A)
Model HM1812
Measured Sound Power Level: 108 dB (A)
Guaranteed Sound Power Level: 110 dB (A)
Yasushi Fukaya
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
6.1.2015
Director
ENH213-9
5