Werbung
VPS10 Panel Scope
TM
Fig 6.0
POWER ON/OFF
You can switch off the device by disconnecting it from the
power supply.
ADJUSTING THE CONTRAST (fig 6.0)
Keep pressing the 'Contrast'-key to change the contrast.
Release the button at the desired setting.
The contrast adjustment direction is reversed each time
the button is pressed.
Remark:
To keep the contrast setting (also after a power cut),
keep the 'mode' button pressed until 'DEFAULT'
appears on the screen.
Use
9
Werbung
Kapitel
