Werbung
Key - instructions
Mode
Up
V/div
Higher sensitivity
t/div
Slower Timebase
Input
ac / dc
X-pos
Right
Y-pos
up
Trigger
Norm / run /roll
Display
screenlayout
Meter 1
Move upwards into
table
Meter 2
"
Meter 3
"
Meter 4
"
* Only when Power readout is selected !
10
Down
Autorange
Lower sensitivity
Autorange
Faster Timebase
GND
x1 / x10 Probe
Fast right
Left
Fast up
down
Slope
Grid / crosshair
Higher load *
Move downwards into
table
"
"
"
"
"
When the 'Mode', 'Up' or 'Down' buttons are not being used
during a few seconds, the device automatically returns to the
default mode.
Autorange
Contrast: Use this button to set the desired contrast level.
Autorange
Up: The 'UP' button is used to select the next value or pa-
rameter, depending on the selected 'mode' setting.
Down: The 'DOWN' button is used to select the previous
Fast left
value or parameter, depending on the selected 'mode' setting.
Fast down
Mode: This button is used to select the function of the 'UP'
and 'DOWN' buttons. Press the button repeatedly to cycle
through the functions.
Lower load *
NOTE:
"
Some keys have double function selected with a long
"
or short
Keeping the 'mode' button pressed for a long time will
"
save the current settings as default.
VPS10 Panel Scope
KEY - INSTRUCTIONS
press.
TM
Werbung
Kapitel
