Readout Set-Up - Velleman VPS 10 Panel scope Bedienungsanleitung

Readout set-up

18
Fig 25
Fig 26
READOUT SET-UP
Press the 'MODE' button repeatedly until the desired meter setting
appears.
Depending on the selected display layout, 1 to 4 measurement results can
be displayed.
The meter mode displays a table with all possible measurement settings.
Select the desired setting with the 'Up' of 'Down' buttons.
Setting up the measurement readouts:
1. Press the MODE button repeatedly to select the first measurement
function ("METER 1").
2. Press the UP or DOWN button to select the parameter you want
METER 1 to measure (Fig 25).
3. Press the MODE button to select the second measurement function
("METER 2").
4. Press the UP or DOWN button to select the parameter you want
METER 2 to measure (Fig 26).
5. Press the MODE button to select the third measurement function
("METER 3").
6. Press the UP or DOWN button to select the parameter you want
METER 3 to measure.
7. Press the MODE button to select the fourth measurement function
("METER 4").
8. Press the UP or DOWN button to select the parameter you want
METER 4 to measure.
9. Press the 'MODE' button to return to the scope display
VPS10 Panel Scope TM