Werbung
VPS10 Panel Scope
Maximum sample rate
Maximum input amplifier bandwidth
Input impedance
Maximum input voltage
Input coupling
Vertical resolution
Trigger modes
LCD Graphics
Signal storage
dBm measurement (0dBm= 0.775V in 600Ώ)
dBV measurements (0dBV= 1V)
True-rms measurement
Peak to peak AC range (sinewave reference)
Timebase range in 32 steps
Input sensitivity range in 12 steps
Probe calibration output
Supply voltage
Operating temperature
Fysical characteristics
TM
10MHz for repetitive signals (2MHz for single shot events)
2MHz ( -3dB at 50mV, 1V & 20V /div x1 setting)
1Mohm // 20pF (standard oscilloscope probe)
100Vpeak (AC + DC), 200Vpeak-peak (AC only)
DC, AC and GND (GND for auto zero reference)
8 bit ± 1bit linearity
Run, Normal, Roll mode for 1s/div and slower timebase
64 x 128 pixels
256 samples, max. 125 samples visible (256 using X shift)
From -73dB tot +40dB (up to 60dB with X10 probe) ±0.5dB accuracy
From -75dB tot +38dB (up to 58dB with X10 probe) ±0.5dB accuracy
From 0.1mV to 80V (up to 400Vrms with X10 probe) 2.5% accuracy
0.1mV to 160V (1mV to 1200V with x10 probe) 2% accuracy
0.2µs to 1hour / division
5mV to 20V/division at X1
Approx. 2KHz / 5Vpp
6VAC or 9VDC/ min 300mA
0 to 50°C (32 to 122°F)
Dim: 195 x 90 x 55mm (7,7 x 3,54 x 2,2") Weight 280g (9,92oz.)
-
50mV to 200V/div at X10
59
Werbung
Kapitel
