Werbung
VPS10 Panel Scope
TM
Safety & Warnings
SAFETY AND WARNINGS
The Panel Scope is ideally suited for measurements of
Symbols displayed on the unit
category II installations with pollution degree 1 and using a
maximum of 600V, in accordance with the IEC1010-1 norm.
Consequently, all measurements should be avoided in case
of polluted or very humid air. One should also refrain from
measuring conductors or installations that use voltages that
!
exceed 600Vrms above ground level. CAT II indicates
conformity for measurements of domestic installations.
The maximum input voltage for the connections of the unit
stands at 100Vp (AC+DC)
Important safety information, see user
Do NOT open the enclosure while performing measurements.
manual.
Remove all test leads before opening the enclosure in order
to avoid electrical shock.
Use a measuring probe with an insulated connector when
measuring voltages exceeding 30V. (PROBE60S).
Ground level
6
Werbung
Kapitel
