Explanation Of The Main Functions; Volume Menu; Sound Setup Menu - Audiotec Fischer DIRECTOR Benutzerhandbuch

4. Explanation of the main functions

4.1 Volume menu

The DIRECTOR allows the control of Master, Subwoofer, HEC/MEC/AUX and Digital volume by using the control dial.
The adjustment range for the source volumes reaches from - 60 dB to 0 dB and for the subwoofer volume from -40 dB
to 0 dB. The increments are graded in 0.5 dB steps.
Note: The control dial always adjusts the red lighted volume bar. You can choose between the two displayed volume
bars by tapping on the respective bar.

4.2 Sound Setup menu

The Sound Setup menu is used to select the different memory positions directly from the DIRECTOR. In total 22 pro-
grammable memory positions are available. Sound Setup 1 and 2 are saved in the DSP itself and the other 20 setups
are saved in the DIRECTOR`s memory.
To change the sound setup use the control dial to select a specific number / name. The setup can be activated by press-
ing the control dial.
Note: Loading a sound setup may take a few seconds. The memory slots are available after connecting to the DSP by
using the USB port of the DIRECTOR. During DSP PC-Tool connection a sound setup selection is not possible.
35