General Usage Information; Using The Director - Audiotec Fischer DIRECTOR Benutzerhandbuch

1. General instructions

1.2 General usage information

USB
PC mode
soft keys navigation
Note: The error symbol lights up if a fault in the system of the DIRECTOR occurs.
In this case please follow the mentioned solution proposals of the trouble-shooting (see chapter 7, page 51) in this man-
ual. If the error symbol still lights up after the execution of the problem-solving approaches, please contact your local
BRAX / HELIX / MATCH dealer.

1.2.1 Using the DIRECTOR:

The DIRECTOR is controlled via the touchscreen and the control dial.
The touchscreen is used to select the different functions and navigate through the menu. The control dial is used to
manage parameters (e.g. volume, sound setups, timeout etc.) in the active menu.
Note: The main menu can also be retrieved by clicking for 2 seconds on the brand logo.
The control dial can also be pressed short or long to activate different functions:
• short press: activates/deactivates the Mute/ATT function or loads the selected sound setup
• long press (device connected): activates the standby mode
• long press (no device connected): turns the DIRECTOR in demo mode on and off
Note: Controlling the volume while Mute/ATT function is activated is not possible
30
Mute / ATT active
Error - Error in
the system