Function And Operation - Gastros InductCook 330 Betriebsanleitung

Function and Operation

Control and Induction Hobs
Your InductCook 330 induction appliance is operated via the rotary switch (1) . You can control the power of your
®
InductCook 330 appliance in two different ways:
®
1. Power mode
Use the rotary switch (1) to set the required power level. Turn the switch to the right to increase the power – to reduce
it, turn the switch to the left.
2. SLIDECONTROL mode (SLC)
SLIDECONTROL – for smooth control. You can control the cooking power just by moving the pan.
InductCook by
®
• Switch-on and stand-by
InductCook 330 appliance. The status indicator (2) and the display (3) below the cooking surface both start to light up.
®
If there is no pan on the cooking surface or if the appliance is unable to detect the pan, the status display (2) flashes.
The display (3) shows «0» when the appliance is in Power mode and «SLC» when it is in SLIDE CONTROL mode.
There is no power transmitted when the InductCook
switch does not affect what is shown on the display if the appliance is on stand-by.
Slide Control SLC
Leistung reduzieren
Aus
2
1
5
330 appliance is on stand-by. In Power mode, the position of the
®
Leistung erhöhen
4
3
1
15