Klarstein 10029707 Betriebsanleitung Seite 36

After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on
the LCD, and the unit will automatically select the suitable operation mode in accordance with the room
temperature to make indoor room comfortable. (As for cooling only unit, it won't have any action when it
receives the signal of heating operation.).
5 FAN button
This button is used for setting Fan Speed in the sequence that goes from AUTO, LOW SPEED, MEDIUM
SPEED, HIGH SPEED and then back to AUTO.
Auto
6 SWING
Press this button to set up &down swing angle, which circularly changes as below:
This remote control is universal. If any command
command as .
OFF
7 I FEEL
Press this button to turn on I FEEL function. The unit automatically adjust tempera-ture according to the
sensed temperature. Press this button again to cancel I FEEL function.
8 / button
Press this button to achieve the on and off of healthy and scavenging functions in operation status. Press:
1x: start scavenging function; LCD displays
2x: start healthy and scavenging functions simultaneously; LCD displays
3x: quit healthy and scavenging functions simultaneously.
4x start healthy function; LCD displays
OFF
OFF
OFF
.
.
, or is sent out, the unit will carry out the
OFF
und .
36