Sleep Mode - clage Zip HydroTap G4 C 175 Gebrauchsanleitung

LCD Screen operation - Section F
Energy Modes
This mode allows the HydroTap to go into energy saving mode. There
are two options available: 'Sleep Mode' and 'On/Off Mode'.

Sleep Mode

In sleep mode the unit will go to "sleep" after a predetermined
period of inactivity. When the period of inactivity passes, the home
screen status window will show "Sleep Mode".
Option 2: "Lux Sensor
gradually rise to room temperature when it's dark and the chiller will
remain OFF (Refer to Lux sensor calibration).
Option 6: "Lux or 2 Hr
ed otherwise Option 1 will be automatically enabled.
Option 7: "Disable" - Chiller circuit remains switched ON.
It is recommended to recalibrate the Lux Sensor after selecting any
of the Lux sensor options from the sleep mode menu (see section C).
Activate the sleep mode
1. Press the [MENU] button for
main menu.
2. Press the [Setting] button.
3. Press the [Energy Modes]
button.
4. Press the [Sleep Modes]
button then in the next screen,
use the up and down arrow
to select your favourite sleep
mode.
Option 1: "2 Hours
Chilled water temperature will
gradually rise to room tempera-
ture after 2 hours of no use and
the chiller will remain OFF.
OFF" - Chilled water temperature will
OFF" - When it is dark Option 2 is activat-
27
OFF" -