LCD Screen operation - Section C
The Zip HydroTap allows the user to adjust the fi lter life and to edit
the fi lter usage. (See fi lter details on page 25).
II. Filter Reset
After replacing the fi lter, the counters should be reset.
III. Lux Sensor Calibration
Note: Perform calibration under normal light conditions
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Filter Reset] button.
4. In the next screen, select
the fi lter you want to reset.
Subsequently follow the fi lter
fl ush steps to start fi lter fl ush
or press [HOME] to cancel the
fi lter reset program. To set the
fi lter life or edit fi lter usage,
refer to section F- Filter.
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Lux Sensor Calibra-
tion] button.
4. The lights on the tap head will
fl ash to confi rm calibration.
23