Inhaltsverzeichnis
Werbung
4. Bedienelemente und Anschlüsse am Gerät
1.
6.
7.
1. Zange, zur Messung von Gleich – und Wechselströmen in
Leitern
2. Taste zum Einschalten der Taschenlampe
3. Funktionswahlschalter
4. DATA-Hold Taste, Hintergrundbeleuchtung
5. LCD-Anzeige
6. Zangenöffner
7. DCA-Zero-Taste
2.
3.
4.
5.
-9-
3.4. Auto Power Off
The Meter will automatically shut itself off after approx. 7 minutes
after power on.
3.5. Data Hold
To freeze the LCD meter reading, press the Data-Hold button. While
data hold is active, the HOLD display icon appears on the LCD. Press
the Data-Hold button again to return to normal operation.
Note:
The HOLD feature will activate when the backlight is turned on. Press
HOLD key again to exit HOLD.
3.6. Backlight
The Backlight function illuminates the display and is used, when the
ambient light is too low to permit viewing on the display readings.
Press the HOLD button for < 2 seconds to turn the backlight on and
press button again to turn the backlight off.
-22-
Werbung
Inhaltsverzeichnis
