Special Settings - Grundig Elegance 63 ST 63-2103 DOLBY Servicehandbuch

OPERATING WITH EXTERNAL APPLIANCES
Headphones
Connecting the headphones
1
Insert the headphone plug (3,5 mm ø jack plug) into the front of the TV set.
– The speaker is switched off.
Select Stereo (two-channel), mono for the headphones
1
Call up the »Sound« menu with »
2 Select the line »
Sound
with » « or » «; »Mono« or »Stereo« and for two-channel broadcasts,
..
select »DUAL A« or »DUAL B«.
P 01 Mono A
y
Mono B
y
3 Complete the setting with »TXT«.
u
Changing the volume of the headphones
OK TXT
1
Call up the »Sound« menu with »
2 Select the lines »
3
Set the volume with » « or » «.
– The altered value is displayed on a scale.
18
_________________________
F
«.
y
« with »P+« or »P-« and select the required sound type
F
«.
y
« with »P+« or »P-« and press » F «.

SPECIAL SETTINGS

Limiting channel selection
The ATS search saves all television channels found and automatically "blocks"
the first non-assigned channel position. This means that only the television chan-
nels which were found can be selected using channel selection. This feature can
also be defined manually. In the example, all channels from channel position 6
have been "blocked".
Manual tuning
1 Call up »Dialog Center« by pressing »
Program 06
C/S Channel
Channel 34
2
Finetun. 00 Select the line »Manual tuning« with »P+« or »P-« and confirm with »OK«.
Name RTL2
3 Select the channel position (in the example, 6) with » «
OK Memorize
TXT
4 Select the line » C/S « with »P+« or »P-« and use » « or » « to select the
» Channel « display.
Note:
The line »C/S« will not appear if the »Adjust country« preselection »France«
or »Others« and then »Cable (frequency sel./MHz)« were selected.
5
Select the line » Channel « with »P+« or »P-« and use
Manual tuning
or, in the case of frequency selection, »000« (dependent on the »Adjust
Program 06
country« preselection).
C/S Channel
Channel 00
Finetun. 00
6 Save the setting with »OK«.
Name RTL2
– Now, only the first five channel positions (and the »AV« channel position)
OK Memorize 0-9 •Tune TXT
can be selected.
– After the direct selection of the first blocked channel position
the example, 6), the "blocked" channel positions can be selected with
»P+« or »P-«.
7
Complete the setting with »TXT«.
Note:
If the blocked channel position is reallocated, the channel position limitation
set is cleared.
Setting TV channels
This setting is only necessary if a new TV channel is added and you wish to
maintain your own particular order for the channel positions. The TV channel
can be set directly or via the automatic channel search.
Manual tuning
1 Call up »Dialog Center« by pressing »
Program 06
C/S Channel
Channel 34
2 Select the line »Manual tuning« with »P+« or »P-«, and confirm with
Finetun. 00
Name RTL2
»OK«.
OK Memorize
0-9 TXT 3 Select the channel position with » «
4 Select the line » C/S « with »P+« or »P-«, and use » « or » « to select the
display » Channel« or »S-channel «.
Note:
The line »C/S« will not appear if the »Adjust country« preselection »France«
Manual tuning
or »others« and then »Cable frequency sel./MHz)« were selected.
Program 06
C/S Channel
5
Select the line » Channel« with »P+« or »P-«, and use » «
Channel 00
Finetun. 00
Name RTL2 » 1... 0 « to enter the channel number desired (or the frequency, dependent
on the »Adjust country« preselection);
OK Memorize 0-9 •Tune TXT
or Start the ATS search with »
____________________________________________________
i «.
» « or .
, » 1... 0 «
» 1... 0 « to enter »00«
(in
» 1... 0 «
i «.
» « or .
, » 1... 0 «
, » « or
F « (blue).
19