Television Mode - Grundig Elegance 63 ST 63-2103 DOLBY Servicehandbuch

SETTINGS
____________________________________________________________________________________
Changing the balance, the bass and the treble
1 Call up the »Sound« menu with »
Sound
.
..
2
Select the lines required »
P 01 Mono
y
»P+« or »P-« and set the required value with » « or » «.
Mono
y
u
3 Complete the setting with »TXT«.
TXT
Stereo (two-channel), mono
If the device receives two-channel transmissions – e.g. a film in the original on
sound channel B (display: »MONO B«) and the synchronised version on sound
channel A (display: »MONO A«) – you can select your preferred sound channel.
If the device receives stereo broadcasts, it automatically switches to stereo sound
playback (display: »Stereo«).
The sound setting last selected will be stored according to the channel.
1 Call up the »Sound« menu with »
Sound
.
..
2
Select line » P01« with »P+« or »P-«.
P 01 Mono fix
y
Mono fix
y
3 If the sound reproduction of a particular channel is constantly mono, select the
u
lines » P..« with »P+« or »P-« and confirm with »OK«.
4
Complete the setting with »TXT«.
OK auto
TXT
Note:
Repeat the setting to cancel this function.
F «.
u « – balance, » « – bass or » « – treble with
F «.
9

TELEVISION MODE

Switching on/off
1 Press » IO « on the TV set to switch it on.
– The TV set switches on at the last channel position viewed.
2
Switch TV set to standby mode with » «.
Switch the TV set on from standby mode with » 1...0« or »P+«.
3 Turn the TV set completely off with »
This saves energy.
Selecting channel positions
1
Select channel positions (including AV) directly with » 1...0«.
or
2 Select channel positions one by one with »P+« or »P-«; or
3
Display or hide selection channel list with »OK« and select desired
TV channel (not »AV«) with »P+« or »P-« or » « or » «.
@
Switching sound on/off
1
Switch sound on or off (mute) with »
Displaying/hiding the clock
1 Display or hide the time with »
Tele Pilot 150 C
Surf function
With this function you can memorise the TV channel you are watching at the
moment and switch (surf) to other TV channels.
1 Select the TV channel, which is to be stored in the surf memory (e.g. TV chan-
nel 7, PRO7) with
»z 7 PRO7«, for example, then appears on the screen.
2 »1 ... 0 « or
3 With »z« you can switch back (surf) to the saved TV channel (PRO 7 in this
example) and then back to the last viewed TV channel.
4 Finish surfing with »
10
_______________________________________________________
IO « on the TV set.
«.
« (only for TV channels with teletext).
»1 ... 0« or »P+, P -« and save with »z«. The indication
»P+, P - « can now be used to switch over to other TV channels.
i «. The indication disappears.