Volume Adjustment; Troubleshooting Guide - Cyrus Quattro Multi-room Gebrauchsanleitung

Cyrus Quattro Multi-room Kit

Volume Adjustment

Press the + key or - key h to adjust the volume level.
Press the MUTE key 1) to mute the sound in the selected zone.
You will hear a beep through the speakers in the selected zone when the Mute
command is received.
Changing the Music Source
The music source playing on the main Quattro system will automatically play
through the additional Multi-room zones. If the source is changed at the Quattro
front panel then all Multi-room sources will also change.
In addition, CD or FM Tuner (where installed) inputs may be selected with the
Remote Control keys 1$, 1%. The source selected will then change for all sources
including the main system.
Changing CD tracks or FM Tuner presets
The NEXT and PREVIOUS keys i of the remote control will change the
selected track (if a CD is playing) or the selected station preset (if an FM tuner is
installed and playing).
If the CD in the Quattro has stopped, play may be re-started by pressing one of
these keys i.
You will hear a beep through the speakers when one of these commands is
received.
GB
GB

TROUBLESHOOTING GUIDE

If your Multi-room kit is not operating properly, disconnect the power from the
main Quattro system and carefully check all connections using the notes in this
handbook. If problems persist, the checklists below may help.
If you are in any doubt, consult your dealer.
Remote control not working
Replace batteries
Handset batteries flat
Incorrect zone selected Select correct zone
No power indication on the RF remote receiver 'ON' indicator 1*
Power not connected to the Quattro Connect the power
Mini-DIN cable disconnected from Check cable connections
Quattro or faulty
No Sound
Quattro switched off or in Standby Switch on
Incorrect Input Selected Select correct input
System amplifiers are not powered Switch on all system amplifiers
Source not playing Operate source
No sound from one loudspeaker
Loudspeaker, amplifier or connection Check other equipment and all
defective connections
User Instructions
6