HP Photosmart Wireless e-All-in-One B110 series Startanleitung

HP Photosmart Wireless e-All-in-One
Start setup here...
Verify box contents.
1
2
Unpack printer. Remove all tape, protective film, and packing material.
3
Connect and power on.
Important!
Connect the power cord and adapter.
4
Follow the Setup Wizard.
Be sure to follow the instructions on the display as
it guides you through setting up and connecting the
HP Photosmart, including how to set up a networked
printer connection and install print cartridges.
For computers without a CD/DVD drive, go to
www.hp.com/support
software.
Printed in [English]
© 2009 Hewlett-Packard Development Company, L.P.
B110 series
Do not connect a USB cable unless prompted by the software!
to download and install the
Inside...
Setup troubleshooting
Get to know your HP Photosmart
Print, copy, scan features and tips
What's new? Web Services
Changing networked printer setup
<3 M
* Not included with all models
Press to turn on the HP Photosmart.
WiFi Protected Setup (WPS)
This HP Photosmart supports WiFi Protected Setup
(WPS) for easy one-button wireless setup.
• During setup, if you are prompted for WPS, and
you have a WPS router, press the WPS button on
the router. The wireless LED on the printer will turn
on if the connection is successful.
• Otherwise, follow the setup wizard on the printer
display. Also, see inside this guide for details.
Register your HP Photosmart
Get quicker service and support alerts by
registering at www.register.hp.com.
*CN245-90071*
*CN245-90071*
CN245-90071
2
3
4
5
6