Bosch XDK 110 Bedienungsanleitung Seite 13

english
2.3.4 API Documentation
The API documentation can be opened using the "Help" function of the
"XDK-Workbench".
2.3.5 Community
Visit http://www.xdk.bosch-connectivity.com. Find updates and further
program examples in the forum. You can also communicate with other
XDK users in the forum. Find updates and program examples, get
technical support, and communicate with other XDK users in the forum.
2.3.6 Acessories
Additionally, the J-link adapter "J-Link 9-Pin Cortex-M Adapter" can be
purchased from Segger (http://www.segger.com). The adapter facilitates
using JTAG to debug the program on the XDK 110. While ordering, refer
to XDK 110 to get the right adapter.
2.3.7 Radiofrequency Radiation Exposure and further Informa-
tion
The radiated output power of the device is far below the FCC radio
frequency exposure limits. Nevertheless, the device shall be used in such
a manner that the potential for human contact during normal operation is
minimized.
notice
This device complies with Part 15 of the FCC Rules and with Industry
Canada licence-exempt RSS standard(s).
Operation is subject to the following three conditions:
• this device may not cause harmful interference, and
• this device must accept any interference received, including interfe-
rence that may cause undesired operation.
• The minimum distance between body an device should be 20 cm.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
trois conditions suivantes:
• l'appareil ne doit pas produire de brouillage, et
• l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
• La distance minimum entre appareil et corps est 20 cm.
Bosch Connected Devices and Solutions GmbH
XDK 110 | 1 3
BCDS20141110V1 | 12.2014