Menu Structure - Velleman M8009 Bedienungsanleitung

_______________________________________________________________________________________________________________________________________________________

3. Menu structure

At power-on, the unit will automatically enter the set-hour mode and wait for your input.
Press '1' to scroll trough the menu, press '2' to confirm
SEt Adjust and change settings
dAtE
Hour
rEGIOn
AL-SEt
HrbEEP
Countd
dAtE Display current date (dd:mm:yy) or
(mm:dd:yy)*
Press '1' to exit date mode
4
Set current date (dd:mm:yy) or (mm:dd:yy)*
Press '1' to increase flashing section, press '2' to
move on to next section. If setting is invalid, error
will be displayed and previous date will return. Per-
form date set again
Set current time (hh:mm:ss)*
Press '1' to increase flashing section, press '2' to
move on to next section. Seconds will remain set to
00 during time set. Pressing '2' while seconds flash
will start clock, allowing easy syncronisation with
reference time.
Select European or US time/date/temperature
format
Press '1' to toggle between US and European
time/date/temperature format
US : 12-hour clock / month-day-year / ° Fahrenheit
European : 24-hour clock / day-month-year / ° Cel-
cius
Press '2' to exit region select mode
Alarm on/off and time/temperature alarm select
Press '1' to toggle between alarm on/off
Confirm by pressing '2'
In case alarm was set to on
tween temperature alarm AL dEG or time alarm AL
hr
Confirm by pressing '2'
Set alarm time similar to the time setting procedure
above (24-h system only)
To set temperature alarm, press '1' to increase tem-
perature, press '2' to confirm.
Chime on/off
Press '1' to toggle between chime on Hr bon and
chime off Hr boff
Confirm by pressing '2'
Set target date (dd:mm:yy) or (mm:dd:yy)* for
countdown
Press '1' to increase flashing section, press '2' to
move on to next section. If setting is invalid, error
will be displayed and previous date will return. Per-
form date set again. If selected date is more than
9999 days from current date, display will show - - - -
dy
press '1' to toggle be-