Unpacking And Assembly - Electrolux ZS101 Dynamica Handbuch

1b
3a
5
1a
1
2
1
2
3b*
4a
GB

Unpacking and assembly (1)

• Check that all parts are in the box.
• Carefully insert the upper stick into the
lower main body (1a). Make sure that the
cable does not jam.
• Secure the upper stick by tightening the
locking screw (1b).
• Fit the floor nozzle towards the vacuum
cleaner.
Starting to vacuum clean
• Release the cable by rotating the upper
cable holder (2), and plug the cable.
• Start / Stop (3a).
1; Off
2; On
• Start / Stop (3b)*
1; Off
2; Medium power
3; Maximum power
Floor nozzles (4)
Carpet / Hard floor nozzle (4a)
Carpets: Use with the lever in position (A).
Hard floors: Use with the lever in position (B).
Parquet nozzle (4b)*
Use for wooden floors.
1 1
2 2
3
* = Certain models only.
4b*