Positioning / Electrical Connection - AEG Electrolux SK 98843-6I Gebrauchsanleitung

Positioning
Unpack the cabinet and check that it is
in good condition and free of any
transport damage.
The appliance must not be located close
to radiators or gas cookers.
Avoid prolonged exposure of the
appliance to direct sunlight.
For safety reasons, minimum ventilation
must be as shown in Fig.
Attention: keep ventilation openings clear of obstruction.
It is necessary that the niche is provided with a conduct of ventilation having
the following dimensions:
Depth 50 mm
Width 540 mm
The climate classification can be found on the rating plate, which is located
inside the cabinet on the left hand wall.
The following table shows which ambient temperature is correct for each
climate classification:
classification
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the
serial number plate correspond to your domestic power supply.
Voltage can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably sized auto-transformer must
be used.
Important
The appliance must be earthed.
The power supply cable plug is provided with a contact for this purpose.
If the domestic power supply socket is not earthed. connect the appliance to
a separate earth in compliance with current regulations, consulting a
specialist technician.
Climate
SN
N
ST
T
for an ambient
temperature of
+10 to +32 °C
+16 to +32 °C
+16 to +38 °C
+16 to +43 °C
59