Photo Converter Indicator Lights; Suitable And Unsuitable Original Types; Suitable; Unsuitable - Pandigital PANSCN05 Bedienungsanleitung

P h o t o C o n v e r t e r I n d i c a t o r L i g h t s
Listed below are the indicator light patterns and the functions they represent:
Power

 




Blinking slowly
S u i t a b l e a n d U n s u i t a b l e O r i g i n a l T y p e s

Suitable

The Photo Converter is designed to obtain the best scanning results with the following types of originals:

3.5"x5" and 4"x6" photos (max size 4.1"x12")

Business cards (max 1.0mm)

35mm negative/monochrome 6-frame filmstrips, and
un-mounted positive slides (negative & slide adapter required).
 Note: for positive slide scans, the mounted jacket must be removed before scanning.

Unsuitable

Do not use the following types of originals for scanning, otherwise the Photo Converter may malfunction or cause the
original to jam in the slot.

Originals thicker than 1.0mm

Originals with either side shorter than 55mm

Originals with lots of black or dark colors

Originals with dark colors surrounding the edges

Printed images (pictures on newspapers, magazines, etc.)

Soft and thin materials (thin paper, cloth, etc.)

Over-exposed film. To avoid auto-detection failure, remove any over-exposed film from the beginning of the strip before
feeding.

Originals that exceed the following acceptable size:
Status
/Card

The Photo Converter is ready for use.
Default: 300x300 dpi in Photo Mode; 1200x1200 dpi in Film Mode
Scanning current original. Please wait until the process is complete before scanning another

original.

The Photo Converter is powered off.
 The Photo Converter is in the roller cleaning mode (refer to page 14). Please wait until


the cleaning process is complete before using the Photo Converter.
 The Photo Converter is ready for use in 600x600 dpi Photo Mode.
 Initializing system and memory card. Please wait until the initialization process is
complete before using the Photo Converter.
 Busy scanning and storing image files. Please wait until the process is complete before
scanning another original.
 Sensor cleaning in progress. Please wait until the process is complete before performing
any operations.
Paper jam. Press the Power button. The Photo Converter will back out the original so you
can remove the jammed original from the output slot.
No memory card, card full (free space below 1MB), card error or SD card locked. Remove
files from the card to free up space, unlock the card if it is locked, or try another card.

Blinking rapidly Steadily on
Width 4.1 inches (105mm)

Off

Length: 12 inches (304.8mm)
5