Introduction; Photo Converter Overview - Pandigital PANSCN05 Bedienungsanleitung

I n t r o d u c t i o n
Now you can scan your printed photos, negative films, & un-mounted slides, and store them on your memory card. No computer is
necessary. Simply insert a memory card into the Photo Converter, and power it on. When the unit is ready, feed your printed photo,
negative film, or un-mounted slide into the Photo Converter and your pictures will be stored in the memory card. It's as easy as
that.
If you want to store your photos directly into your PC, it's just as easy via a USB cable and our Scan2PC software (page 12).
P h o t o C o n v e r t e r O v e r v i e w
Front View
No. Name

Power Button

Power Indicator

Status/Card Indicator

Paper Guide Slide

Feeding Slot

Grooves

Orientation guide
Rear View
No. Name
 SD/xD/MMC/
MS card slot

Output slot

Mini USB connector

Power connector
4
Function/ Description
Press to power on or off.
Press and hold this button for 5 seconds to enter cleaning mode. (Refer to "Cleaning the
Photo Converter" on page 14.)
Indicates the power status of the Photo Converter. (Refer to "Indicator Lights" on page 5.)
Indicates the operating status of the Photo Converter and memory card. (Refer to "Indicator
Lights" on page 5.)
Slide the guide to adjust for smaller than 4x6" originals to ensure the proper alignment.
Insert an original photo into this slot to begin scanning.
For installing the negative & slide adapter.
Indicates the correct position and orientation of the original for proper scanning.
Function/ Description
Accepts the following types of memory cards: SD, xD, MMC and MS. (Refer to "Supported
Memory Cards" on page 6.)
The scanned original comes out from this slot.
For connecting to a computer via a USB cable.
For connecting to the supplied power adapter.