Automatic Image Cropping - Pandigital PANSCN05 Bedienungsanleitung

4. Hold up the negative towards light, with the image facing you in normal orientation (not mirror or upside
down).
5. Insert the filmstrip into the negative & slide adapter.
6. The filmstrip will be fed into the slot and scanned automatically. The Power and Status/Card indicator lights
blink while scanning.
 Common filmstrip length is up to 6 negatives/slides. To prevent poor image quality, reserve adequate space
behind the Photo Converter for the filmstrip to complete the scan feeds.
 While scanning a filmstrip, the Photo Converter automatically recognizes the filmstrip type (positive,
monochrome, or negative) and determines the best suitable scan and color enhancement settings for
scanning.
 The Photo Converter scans filmstrips at a higher resolution; therefore the scanning speed is slower than that
of photo scanning. This is not a malfunction.
When scanning is completed, the Power and Status/Card indicator lights will keep blinking momentarily,
indicating that the Photo Converter is processing the image and storing the file onto the memory card.
Wait until the indicator lights stop blinking before inserting and scanning the next photo.
CAUTION: Insert only one filmstrip at a time, and insert the next filmstrip only when the previous one is done, otherwise
the Photo Converter may malfunction.
 Do not remove the memory card or disconnect the power supply while the indicators are blinking.
 This Photo Converter only supports output images in JPEG (.jpg) format, and the date/ time attribute will not be added.
 If the memory card is near full (lower than 1MB), the Status/Card indicator blinks (refer to "Indicator Lights" on page 5).
Use another card or delete some files on it if necessary.
To remove the negative & slide adapter after all filmstrips are scanned, gently pull it out from the feeding slot.
To power down the Photo Converter, press and hold the power button for one second. The power indicator
will blink and then go off.
Now you can safely disconnect the power and remove the memory card from the Photo Converter.

Automatic Image Cropping

The Photo Converter has a built-in cropping function that detects and crops dark edges of an original during the scan
process (see following illustration).
Use the plastic sheath when scanning originals that are sized or shaped other than the standard 3.5"x5" or 4"x6".
Depending on the shape, you may want to perform additional manual cropping on the scanned image, using your own
photo editing software, to achieve your desired final image.
 When scanning darker originals (for example, a photo of the night sky),
over-cropping may occur. Please insert the original in a different direction
(orientation) and try again.
10
Cropping size (as measured on the original)
Max.
1.5mm
Original
Scanned image
Pay attention to the direction of the
filmstrip when inserting.
Max. 1.5mm
Max.
1.5mm
Max. 1.5mm